Contact

GPX-32

Manage. Monitor. Control.
General Purpose IO

GPX-32 and PDP

GPX 32 – Universal Interface to interact and connect with a wide range of parallel devices where direct control over signals is required.

 

PDP – Punch Down Panel ensures secure and reliable cable and network equipment connections.

Front and Back panel of a GPX-32
Front and Real of a TE-09 Punch Down Panel (PDP)
graphical representation of a GPX-32 signal flows
Versatile and Rack-Mountable

Universal interface for local or remote connection and communication supporting parallel channels of analog, status, control, and monitoring.

 

Integrates with Axess Software

Translates GPI/O channels into data and relays information for processing by Axess network-based management application.

Built-in Monitoring
Integrated temperature, humidity, mains, DC voltage monitoring.

Infinite Expansion
Multiple units can be deployed within an Axess system for unlimited GPI/O expansion.

Punch Down Panel Interface

Our Punch Down Panel plays a crucial role in the organization and management of network infrastructure, especially where many network connections need to be established and maintained. Ensures secure and reliable network performance and reliability.

Specifications

GPX-32

Front panel of a GPX 32
  • 110-220VAC, 50/60Hz via standard IEC plug
  • Input Voltage: 100 ~ 240VAC
  • Input Frequency: 47 ~ 63Hz
  • Input Current: 0.8A ~ 0.5A
  • -30°C to +45°C (-22°F to 133°F)
  • 10% to 90% RH (non-condensing)
  • 19″W X 1.75″H (1U) X 10.5″D, Standard EIA Rack Mounting
  • Operating Range: -30°C to +80°C (-22 F - 176 F)
  • 10% to 95% RH
  • AC Mains Voltage
  • DC Bus Voltage
  • Data Illuminates with the arrival of incoming host data.
  • Error CRC Communication Error or any general error condition.
  • Power DC Bus Power Good.
  • Ethernet 10Base-T or 100Base-TX (Auto-Sensing)
  • Connector RJ45
  • Indicators (LED)
  • 10Base-T/100Base-TX connection
  • Link and activity indicator Full/half duplex
  • Number of Inputs: 32 Total
  • I/O Connector: 0.050″ 68 Pin SCSI Connector
  • Input Voltage Range: +5VDC to +30VDC Non-Polarized Anode and Cathode available on isolated pins
  • Number of Inputs: 32 Balanced Differential
  • I/O Connector: 0.050″ 68 Pin SCSI Connector
  • Input Voltage Range: +/-5VDC and +/-15VDC, selectable in 4 banks of 8=
Input Modes:
  • Differential Both AIN+ and AIN- inputs driven within voltage range however neither signal falls below a common or ground reference. The difference in the 2signals is amplified across the full scale input of the ADC.
  • Bipolar AIN+ input driven within voltage range above and below AIN- while it is held at fixed reference. The signal is amplified across the full scale input of the ADC.
  • Unipolar AIN+ input driven within voltage range while AIN- is held at a fixed reference. The signal is amplified across ½ full scale of the ADC.
  • Input Impedance: Minimum 100K
  • ADC: 16 bit, 200Ksps, +/-2LSB INL, accurate to within +/-5% of input voltage
  • Number of Outputs: 32 Total
  • I/O Connector: 2 X 0.050″ 50 Pin SCSI Connector
  • Contact Rating: 1A @ 30VDC
  • Maximum Switching Power: 30W
  • Maximum Switching Voltage: 60VDC
  • Maximum Switching Current: 1A
Summary

GPX-32 and PDP

The GPX-32 is a universal interface designed to support 32 parallel channels of analog, status (via opto-isolated) and control (via relay contacts) per unit.

Diagrams

Graphical drawing of GPX-32 to TE09 PDP connections
Graphic of the TE-09 PDP 110 connections
Downloads

Documentation

GPX-32 Product Sheet
Download
GPX-32 Setup Guide
Download
PDP Setup Guide
Download

Software

Lantronics Device Installer
Download

Contact

Have questions or would like a demo? Our team is standing by.
Click here